Ducati Diavel Jetprime Oxymett Lambda Probe Inhibitor
Regular price
£106.20
Incl. VAT: £127.44
**Ducati Diavel Jetprime Oxymett** Lambda Probe Inhibitor - COX 001
Fits:
DIAVEL (1200 Cc) - 2011/2019
DIAVEL (1262 Cc) - 2017/2021
**Jetprime** is proud to present it’s latest creation the **Oxymett lambda
probe emulator**.
Every passionate Ducati lover is all too aware that many of the current
homologation rules and regulations create problems for Ducati bikes. The new
Ducati Multistrada 1200 is a beautiful and fantastic bike but it is also
plagued by 2 very annoying problems:
\- Sudden stalling and cut off as you are approaching a junction.
\- A jagged and disturbing ride in the low rpm’s which is particularly noticed
whilst you are going along at a leisurely pace.
The other motorcycles which are affected by this problem are the latest
generation of the Ducati Monster and Hypermotard which all fitted with Siemens
electronics (1100, 796 and 696).
It is finally time to say goodbye to jagged and unwanted stalling on the
Ducati Multistrada 1200 and Ducati bikes fitted with a Siemens ECU.
After hours of testing in both laboratory and normal everyday road conditions,
Jetprime is finally able to solve these problems: the solution is called the
Oxymett!
There are 2 types of emulator available:
\- The first is dedicated to the Multistrada and the Diavel and is a
replacement for the lambda probes by eliminating and imitating their
functions.
\- The second type is dedicated to all the stock Siemens electronic systems
and continues to use the original lambda probes but modifies the output data
to make it more effective.
The Oxymett brings to a halt the actual work of the lambda probes avoiding an
excessive thinning of the carburation (this also applies when a race power
module is fitted). Without the Oxymett your race or aftermarket power module
(also with Ducati Performance) will only take effect after 3400 rpm as below
this range it’s function is reduced by the lambda sensors.
Jetprime recommends using the Oxymett with our Memjet Evo power module or even
better still with our Jetprime programmable module as all of our products have
been tested in-house to be compatabile with each other.
Fits:
DIAVEL (1200 Cc) - 2011/2019
DIAVEL (1262 Cc) - 2017/2021
**Jetprime** is proud to present it’s latest creation the **Oxymett lambda
probe emulator**.
Every passionate Ducati lover is all too aware that many of the current
homologation rules and regulations create problems for Ducati bikes. The new
Ducati Multistrada 1200 is a beautiful and fantastic bike but it is also
plagued by 2 very annoying problems:
\- Sudden stalling and cut off as you are approaching a junction.
\- A jagged and disturbing ride in the low rpm’s which is particularly noticed
whilst you are going along at a leisurely pace.
The other motorcycles which are affected by this problem are the latest
generation of the Ducati Monster and Hypermotard which all fitted with Siemens
electronics (1100, 796 and 696).
It is finally time to say goodbye to jagged and unwanted stalling on the
Ducati Multistrada 1200 and Ducati bikes fitted with a Siemens ECU.
After hours of testing in both laboratory and normal everyday road conditions,
Jetprime is finally able to solve these problems: the solution is called the
Oxymett!
There are 2 types of emulator available:
\- The first is dedicated to the Multistrada and the Diavel and is a
replacement for the lambda probes by eliminating and imitating their
functions.
\- The second type is dedicated to all the stock Siemens electronic systems
and continues to use the original lambda probes but modifies the output data
to make it more effective.
The Oxymett brings to a halt the actual work of the lambda probes avoiding an
excessive thinning of the carburation (this also applies when a race power
module is fitted). Without the Oxymett your race or aftermarket power module
(also with Ducati Performance) will only take effect after 3400 rpm as below
this range it’s function is reduced by the lambda sensors.
Jetprime recommends using the Oxymett with our Memjet Evo power module or even
better still with our Jetprime programmable module as all of our products have
been tested in-house to be compatabile with each other.